MGOTECH 16mm & 19mm MgO Floor Boards

THE LATEST INNOVATION IN CEMENT FLOOR BOARDS

Based on the latest advancement in cement and fibre-reinforcement technology, MGOTECH 16mm & 19mm floor boards are STRONGER, LIGHTER & CHEAPER than Fibre Cement boards. MGOTECH floor boards have a greater bending strength than thicker, heavier Fibre Cement (FC) boards. This results in a load capacity that is far greater than FC boards.

Independently tested and certified to meet NCC/BCA DEEMED-TO-SATISFY structural requirements for floor loading to AS/NZS 1170.1 Table 3.1. See MGOTECH Design & Load Tables below for more information. Suitable for RESIDENTIAL & LIGHT COMMERCIAL applications – see Design & Load Tables below.

Suitable for INTERNAL, EXTERNAL and WET AREA applications

NON-COMBUSTIBLE per AS 1530.1

Tongue-and-grooved for easy installation

Can be fixed with screws or a nail-gun

Green and eco-friendly production

Non-toxic

Mould, rot and termite resistant

Free of potentially corrosion inducing chloride ions

For residential applications, MGOTECH boards can be installed with either the rough side or the smooth side up. For commercial applications, installation must be with the rough side up.

Tested to relevant Australian Standards – refer to Physical Properties Schedule below.

MGOTECH FLOOR BOARDS OUTPERFORM TYPICAL FIBRE CEMENT FLOOR BOARDS

Stronger – 16mm MGOTECH floor boards outperform typical 19mm FC Floor boards and 19mm MGOTECH floor boards outperform typical 22mm FC floor boards. Typical 19mm FC floor boards have an average wet MOR (modules of rupture) of ＞7 MPa (megapascal). 16mm MGOTECH floor boards have a wet MOR ＞16 MPa. As a result, MGOTECH floor boards can substitute thicker FC boards while still achieving a stronger floor solution.Lighter – MGOTECH floor boards are up to 7Kg lighter than equivalent, thicker FC floor boards. This results in easier handling and faster installation.

Cheaper – By substituting thicker FC floor boards with thinner MGOTECH floor boards, the builder can benefit from significant cost savings. Easier handling and faster installation will also reduce labour costs.

More Versatile – 16mm and 19mm MGOTECH floor boards can be used internally, externally and in wet areas. They can also be used for residential and light commercial applications. One board – multiple applications

Greener Production Process – MGOTECH floor boards have significantly less embodied energy than FC boards.

Less Hazardous – FC boards contain high levels (up to 60%) of crystalline silica (CS). When inhaled as dust particles, CS is classified as a hazardous chemical. It can lead to silicosis and/or contribute to lung cancer. MGOTECH boards contain only trace elements of CS which do not pose a health risk.